Software Update - Talon with Bluetooth v1.460

Released 10/27/2020

Software Description

Affected Models:

  • All Bluetooth® enabled Minn Kota Talon shallow water anchors and compatible wireless remotes.

Updated Features:

  • Controller: Updates allow for the Talon w/ Bluetooth controller to support the use of Raptor/Talon Wireless Stomp Switch accessory, and updates wireless device management protocols.
  • Remote: Adds the Raptor/Talon Wireless Stomp Switch accessory, and synchronizes the software revision for handheld Talon w/ Bluetooth remotes, and Talon w/ Bluetooth Foot Switch accessory

Software Prerequisites

  • When updating Talon(s) software, the Talon(s) must be powered on and fully retracted.
  • The Talons must be paired and connected to the device being used to update the software.
  • When updating Talon(s) via the mobile Talon app, the app itself must first be up to date with the most recent software update.
  • When updating Talon(s) via your Humminbird Fish-finder/Combo, you must make sure the fish-finder has the most recent software update.

Instructions

As a reminder, this software is intended for use with a Bluetooth enabled Talon.  If you have a smartphone, we highly recommend that you download the Minn Kota Talon App to perform these updates.  This app can be found at the Apple Store or the Google Play Store. If you update via the app, you do not need to download the files below.

Instructions using the Talon Mobile App:

  1. Make sure that the following criteria* are met:
    • The Talon App is up-to-date.
    • The smartphone device has Bluetooth enabled.
    • The smartphone device is paired to the Talon.
    • The device is in range of the Talon during the update process.

    *Note - For further instructions on setting this up, visit MINNKOTAMOTORS.COM/SUPPORT/MANUALS/SHALLOW-WATER-ANCHORS
  2. Open the Talon app on the smartphone device.
  3. Read and accept the disclaimer to bring up the Home screen. In the upper-left corner of the Home screen, press teh "Menu" icon.
  4. When the Menu screen displays, select the Software Update option.
  5. If the software is up-to-date, the screen will read, "Up to Date". if the software needs to be updated, there will be information on the screen stating "New Software Available."
  6. Select "New Software Available" and information about the current and new versions will display, along with a button that reads, "Tranfer" when ready.
  7. Press the "Transfer" button and follow the on-screen prompt to successfully complete the update.

Instructions using your Humminbird Fish-finder/Combo:

  1. Update the software in your Humminbird unit per the units software instructions.
  2. Save the Talon software onto an SD card.
  3. Insert the SD card into the card reader slot of the unit.
  4. Follow the on-screen prompts during the Talon software update process.
  5. When the software update is complete, the Talon(s) will automatically reboot, and you will hear a “beep” and the lights on the Talon(s) will flash momentarily.
  6. If your Talon remotes require a software update, the Talon will now send the software update to the remotes. This is identified by the lights on the Talon remote beginning to flash. This can take up to two minutes to complete the software update process.
  7. If a remote update was necessary, the remotes will need to be re-paired to the Talon(s).
  8. Follow the instructions in the Talon User Manual to re-pair the Talon remotes to the Talon(s).

DOWNLOAD FOR HELIX SERIES UNITS

DOWNLOAD FOR SOLIX/ONIX/ION SERIES UNITS