Software Update - 360 Imaging - SOLIX, ONIX and ION Platform v 2.30
Released 4/7/2014
Software Description
v.2.030-This software is the initial release for 360 Imaging units that will be used with the SOLIX, ONIX or ION Series of products.
DO NOT USE this release if you own a HELIX 9, 10, 12, 798ci HD SI, 898c, 899ci, 998c, 999ci, 1198c or 1199ci as the primary driver of your network or only have one of the units listed.
Software Prerequisites
Personal computer with Internet access, a formatted 32GB or smaller SD memory card, and a USB Memory Card Reader.
Instructions
- Install a formatted SD memory card into the card reader connected to your PC.
- Download the software onto the SD memory card.
- Install the SD card with the updated software files into the control head card slot.
- Power on your Humminbird unit.
- Navigate to the Files Tool on the Home Screen.
- Select the newest 360 update and press Install.
- The update will take 1-2 minutes and the 360 may disconnect during the installation process. The control head will display a dialog box to indicate that the update is in progress.
- Restart your Humminbird unit once the updates are completed by pressing and holding the POWER/LIGHT key to power off the control head. After the control head shuts down, press the POWER/LIGHT key to start the control head,