Software Update - 360 Imaging v. 2.030

Released 4/7/2014

Software Description

v_2.030 - this software is for use with products in the HELIX 9, 10, 12, 700, 800, 900, 1100 Series only.

Software Prerequisites

Personal computer with Internet access, a formatted 32GB or smaller SD memory card, and a USB Memory Card Reader. 

Instructions

1. Install a formatted SD memory card into the card reader connected to your PC.
2. Download the software onto the SD memory card.
3. Install the SD card with the updated software files into the control head card slot.
4. Power on your Humminbird unit.
5. The software will be updated automatically.  It may take up to two minutes for the software to be detected on the network, and the control head will display a dialog box to indicate that the update is in progress.
6. Restart your Humminbird unit once the updates are completed by pressing and holding the POWER/LIGHT key to power off the control head.  After the control head shuts down, press the POWER/LIGHT key to start the control head. 

DOWNLOAD