Software Update - Matrix 67 v. 3.850

Released 2008-01-25

Software Description

v3.850 New depth algorithm to improve performance at high speeds. Improved FishID algorithm. US2 transducer support. CannonLink support. InterLink support. Wide line track style. Allow writing to Navionics cards. Rotate through the menu tabs and items. Remember the previously active tab. Aux Temp readout. Navaids shown in Bird’s Eye View. Fixes various minor issues found in testing.v3.240 Stop upper and lower depth ranges being reset at startup when they are less than 10m apart, stop Depth box flashing after Sonar is turned Off, stop the Point of Sale script during PC Connect mode and when asking the user to update software from MMC/SD, improve second-return rejection, work around a Navionics chart problem on certain 2006 charts. *** v3.080 Modified depth algorithm. Fixed FAT12 problems (16 MByte and smaller MMC cards). Add image capture. Add new waypoint menus. Add course projection line. Default to show map borders from MMC cards.

Software Prerequisites

Minimum Computer Specifications:

  1. Windows 95 or higher
  2. 32 MB Ram or higher
  3. Minimum of 20 MB Free Disk Space
  4. Pentium or Celeron processor
  5. An available USB Port
  6. Humminbird AS PC3
  7. Monitor capable of running 800x600 or higher
  8. You must have previously installed HumminbirdPC to your laptop or PC.

Instructions

CAUTION! We highly recommend that you restore the defaults on your Humminbird unit prior to downloading any new software as it can create complications that can only be fixed at the factory.

Downloading the Software to your PC for Updating the Unit

  1. Click on the XXX UPDATE in the Download box below the software description.
  2. The File Download box will pop up - Click SAVE and indicate where to save the software update file so that you can retrieve it momentarily.
  3. A Download Complete dialog box will appear - click CLOSE

Connection to your PC

  1. Plug the USB cable to an available USB port
  2. Plug the Accessory connector into the unit
  3. Attach the power cable to the new 8 AA batteries on the AS PC3 (DO NOT PLUG THE POWER CABLE INTO THE UNIT AT THIS POINT)

Using Humminbird PC

  1. Be sure your unit is connected to the computer, but do not power on the unit at this point
  2. On your computer's task bar go to START>>-PROGRAMS>>HUMMINBIRDPC. This will start the HumminbirdPC program. After Humminbird PC loads power on your Humminbird unit.
  3. On the Humminbird PC program you will then see an icon of your Humminbird unit. Click on this icon.
  4. You will then see an icon that is a yellow oval with a blue circular arrow , click on the yellow oval icon.  HumminbirdPC will then start the Humminbird Software Update Wizard.
  5. You will then click on Next to proceed.  Your unit name and serial number will then appear on the screen.
  6. You will then click on Browse and then click on the update file (.bin file) that you have saved to your PC and click Open. This will prepare the file to be transferred into you unit.
  7. Then click next to proceed with the software update, the update will then start. DO NOT POWER OFF THE UNIT DURING THE UPDATE.
  8. Once the software update is complete the unit will reboot itself.

DOWNLOAD